Products

 
Kit part numberA-00024

Add -220 for 220x1.0 head
Add -55 for pre-fitted 55mm plate springs

or

Add -400 for 400x0.7 head
A-00090

Add -220 for 220x1.0 head
Add -55 for pre-fitted 55mm plate springs

or

Add -400 for 400x0.7 head
A-00010A-00095

Add -220 for 220x1.0 head
Add -55 for pre-fitted 55mm plate springs

or

Add -400 for 400x0.7 head
ModelMicroBio MB1MicroBio MB2MicroBio MB2-HiFlowMicroBio MB2-RSH
Data SheetMB1 Data SheetMB2 Data SheetMB2-HiFlow Data SheetMB2-RSH Data Sheet
DescriptionThe simplest to use bioaerosol sampler in the world. Ready to use out of the box and ideal for budget constrained users.The ideal choice for use in all forms of indoor hygiene monitoring from food packaging to healthcare.Perfect for use in operating theatres and production zones where time to sample is at a premium.Perfect for fixed installations and isolator cabinets.
Flow Rate (lpm)100100180100
Volume range per sample (litres)10 - 200010 - 10000 (note 1)10-1000010-10000
User volume memory999
220 x 1.0mm Stainless Steel Sampling Head (note 3)d50 = 1.7 um
Uj = 9.65 m/s
55mm plates ✓
90mm plates ✓
d50 = 1.7 um
Uj = 9.65 m/s
55mm plates ✓
90mm plates ✓
d50 = 1.7 um
Uj = 9.65 m/s
55mm plates ✓
90mm plates ✓
400 x 1.0mm Stainless Steel Sampling Head (note 3)d50 = 1.71 um
Uj = 9.55 m/s
90mm plates ✓
400 x 0.7mm Anodised Aluminium Sampling Head (Note 3)d50 = 1.35 um
Uj = 10.83 m/s
90mm plates ✓
d50 = 1.35 um
Uj = 10.83 m/s
90mm plates ✓
d50 = 1.35 um
Uj = 10.83 m/s
90mm plates ✓
Delayed Start1 - 60 minutes1 minute to 3 hours1 minute to 3 hours1 minute to 3 hours
Sequential Sampling5 mins to 24 hours, up to 100 individual samples
up to 10,000 Litres
5 mins to 24 hours, up to 100 individual samples
up to 10,000 Litres
5 mins to 24 hours, up to 100 individual samples
up to 10,000 Litres
Tripod MountStandard on controller
Optional on remote head
Battery Life (note 2)> 60000 litres> 60000 litres>40000 litres> 60000 litres
Battery4 x AA NiMh (supplied) or Alkaline4 x AA NiMh (supplied) or Alkaline4 x AA NiMh (supplied) or Alkaline4 x AA NiMh (supplied) or Alkaline
Battery chargerSupplied with UK, European, US and Australian plugsSupplied with UK, European, US and Australian plugsSupplied with UK, European, US and Australian plugsSupplied with UK, European, US and Australian plugs
External main DC power supplyOptionalOptionalOptionalOptional
Padded carry case
DTI VAM Validated
Worldwide Warranty2 years2 years2 years2 years
User interfaceWipe clean membrane keypad with bright 4-digit display for simple setting of the volume to be sampled.Wipe clean membrane keypad with multi-lingual alphanumeric display. Menu driven control for performing all functions and settings.Wipe clean membrane keypad with multi-lingual alphanumeric display. Menu driven control for performing all functions and settings.Wipe clean membrane keypad with multi-lingual alphanumeric display. Menu driven control for performing all functions and settings.

Note 1: The MB2 has a special option available at extra cost to perform continuous sampling for up to a 24 hour period, equivalent to 144000 litres of air on a single sample and with the option to be powered by an external 9 to 36V DC power source. This is known as the MB2-Atacama model.

Note 2: Based upon random samples until low battery warning given. These tests were undertaken on units fitted with new and fully charged Ansmann Max-e 2500 mA.Hr NiMh cells. Actual battery life may vary due to volume taken per sample, interval between samples, age of cells, and other environmental effects, such as humidity and temperature.

Note 3: One sampling head is supplied with each sampler and must be chosen at time of ordering. d50 is the mean cut-off particle diameter, Uj is the particle velocity. These figures are determined by mathematical modelling and verified b independent tests. Individual certification for heads is available at extra cost. Springs are supplied with the 220 hole head to accommodate 55 or 90mm plates. The 400 hole heads are only supplied with springs for 90mm plates.