Sampling at 180 litres per minute
Bioaerosol samplers are vital equipment for use in bioaerosol research, clean rooms, pharmaceutical validation, food production and packaging, indoor air quality, HVAC and throughout hospitals and healthcare settings, wherever air hygiene is vital. The MicroBio MB2-HiFlow Bioaerosol Sampler has all the features of the tried and trusted MicroBio MB2 model, but with the added advantage of sampling at a rate of 180 litres per minute, nearly halving the time to take a sample. The time to sample a cubic meter of air is reduced from 10 minutes to 6 minutes.
Trusted economical sampling
The MicroBio MB2-HiFlow uses standard 90 mm Petri dishes and a 400 hole hard-anodised aluminium sampling head, avoiding the expense of proprietary sampling media. Using standard readily available consumables, at low cost with a variety of media, makes the MicroBio MB2-HiFlow an economical instrument to use. In use worldwide, the MicroBio MB2-HiFlow bioaerosol sampler is an invaluable device to help meet a wide range of compliance standards.
Sample head 400 holes x 1.0mm
Flow (L/min) 180
Autoclave safe sampling head ✓
d50 (µm) 1.71
Mean particle velocity (m/s) 9.55
Sampling Volume per Sample (litres) 10 - 10,000
Sequential Sampling 5 mins to 24 hours, up to 100 individual samples
up to 10,000 Litres
Start delay 1 min to 3 hours
User defined volumes 9
(Default: 100, 200, 400, 500, 750, 1000, 2000, 5000, 10000 litres)
Autonomy (litres) using NiMh 40,000
LCD display ✓
Microprocessor Control ✓
90mm Petri dish ✓
Weight (kg) 0.69
Tripod mount ✓ (Supplied with mini table-top tripod)
UNC ¼-20 Photographic thread
Dimensions 196 x 100 x 108 mm with attached sampling head
Battery 4 x AA NiMH cells, 6V
Battery replacement User replaceable for under £15
Fast charger (minutes) 120
Charger UK, Euro, USA, Australia and 12V in-car
Carry Case ✓
Warranty 2 years
Screen languages English, French, German, Hungarian, Italian, Malaysian, Norwegian, Spanish
Supplied with the MB2-HiFlow Bioaerosol Sampler
- 400 x 1.0 mm hard-anodised aluminium sampling head
- Operating manual
- Hard back padded carry case
- Mini table-top tripod
- Multi-voltage worldwide charger with UK, Euro, USA, Australia and 12V in-car plugs and pre-charged cells so the MB2-HiFlow is ready to use out of the box
- Optional medical grade mains power supply
- Certificate of Calibration
Note: Petri dishes are not supplied with the kit.
Tripod (Part No. P0001TRI001) – INCLUDED AS STANDARD
Aluminium indoor table-top tripod for use with MicroBio MB2-HiFlow. This tripod enables the MB2-HiFlow to stand on its own with a height range of 145 to 245 mm (to base of MB2-HiFlow).
Head Retaining Spring (Part No. P0001M009)
Replacement sampling head retaining spring. Sold individually
Petri Dish Retaining Springs (Part No. P0001M008)
Replacement springs used to hold 90 mm Petri dish plates. Sold in a pack of 3.
Spring Retaining Screws (Part No. P0001SCR003)
Replacement stainless steel M3 x 6 screws used to fasten the dish, plate and head retaining springs. Sold in a pack of 10.